core support after blasting and cutting out the rust prepairing to make patch panels
Date/Time: 2004:02:06 09:26:11
Filling in the transmission tunnel cover, and the areas where the rust was cut out
Date/Time: 2004:01:29 14:17:18
firewall blasted for the first time and the areas ground ready to weld in patch panels or weld up the small holes
Date/Time: 2003:11:25 12:01:38
We installed the fender and found that the bottom corner had beeen cut off.
Date/Time: 2004:02:05 12:16:28
Firewall and dash filled in ready for final blasting, then body work to make the dash look original again
Date/Time: 2003:12:02 13:29:08
fitting the a/c box and speaker grille filled in, the radio, and a/c control head holes have been cut
Date/Time: 2004:02:02 16:43:57
MSD 6A box installed out of the way and not in the engine compartment
Date/Time: 2004:05:06 16:00:35
Dash is finished, Autometer gauges in a custom panel, along with the unique a/c vents, and swith panel
Date/Time: 2004:06:10 16:59:38
Custom stainless steel gas tank with baffle 1/2" fuel pick up and AutoMeter sending unit
Date/Time: 2003:11:13 09:34:29
All the fuel, brake lines, and power cables for the batteries and winch plugs both front and rear ran ready for the body to be installed
Date/Time: 2004:05:05 11:46:05
Lower radiator bracket also holds the dual fan assembly and the large Griffen radiator
Date/Time: 2004:05:20 08:06:36
Transmission cooler, a/c condensor w/fan, and headlight installed and connected
Date/Time: 2004:07:28 12:06:02
Upper radiator and fan shroud mount, along with a cuatom hood latch pull made out of ss rod
Date/Time: 2004:06:09 11:23:13
Close up of the brake system, with the adjustable perportioning valve on the frame, before the column is installed
Date/Time: 2004:05:13 12:26:24
Close up of the front suspension with the custom drop brackets for the Addco sway bar, and steering stabilizer
Date/Time: 2004:07:16 14:45:51
Dual stick shifter for the transfer case made from a dirt track shifter
Date/Time: 2004:07:01 10:02:33
Customer did not like the original fabric and look after driving the Jeep for awhile so Stiches recovered the front two along with the rear seat
Date/Time: 2006:08:28 09:24:13
1/2" ss tube with the rear wiring ran in it along with the gas tank fill tube
Date/Time: 2004:06:10 16:58:48
Dual batteries yellow top for the winch and stereo, red top to start the Jeep with, and a isolator to keep them both charged
Date/Time: 2004:07:19 15:27:56
Custom heavy gauge ss battery cover installed to protect the batteries and the interior from the batteries
Date/Time: 2004:07:16 14:41:38
Mandrel bent all ss including the muffles sounds good not to loud just right
Date/Time: 2004:07:16 14:46:01